| BRAND | Notifier by Honeywell |
| Product | AM-4000 |
| Description | fire alarm module |
| Internal code | IMP4000887 |
| Technical specification | 4 loop loop addressed fire detection control unit for the management of addressed type systems. Each line allows the connection of 99 detectors and 99 modules. The control unit allows separate management of the gas detection. thanks to a specific interface module. that view it must take place on a remote terminal dedicated only to technical alarms. Exit controlled siren. relay outputs for general alarm and fault. Two serial outputs in the standard version with two other options via additional board. Standard outputs for 22 terminals and for PCs for download / upload programming. Optional outputs for ethernet connection (TCP / IP) and one USB for pc or printer. or an RS232 / 485 output for connection to NOTE-FIRE-NET. Graphic display with 8 rows by 40 columns. written programmable from 32 characters per point and 32 characters per zone. 150 areas geographical and 400 groups with logical operators (AND. OR. DEL. etc.). Archive of 999 events. Auto programming of lines with double address recognition. Signaling of need for maintenance for detectors. CPR certified in compliance with EN 54 parts 2 and 4. Power supply from 230Vac mains. power supply standard 2.7A. Auxiliary current at 24Vdc of 1A. Charging two batteries a 12Vcc from 17Ah. Dimensions: 483mm x 266mm x 111mm. |
default.send_request_amp_Group2