| BRAND | Aviteq |
| Product | SAE-GS50-2 |
| Description | CONTROL |
| Internal code | IMP4681272 |
| Custom code | 85365003 |
| Technical specification | 80.. 420V 50HZ 25A IP00 Drawing number 00907071 Dimensions 200 x 230 x 140 mm (HxWxD) VIBTRONIC® -S controller for connecting AVITEQ vibrating conveyors. The swing width of the conveyor can be infinitely adjusted on the connecting device. Flow rate adjustment range from close to 0 to 100%. With a complete set of potentiometers for manual oscillation width adjustment. Electromagnetic compatibility (EMC) tested in accordance with the applicable EC Directive. As grid protection, we recommend protection in accordance with the rated current of connected magnetic vibrator (slow safety). Vibration rate SA.. 25.. 1,500 min-1 SAT.. 30.. 1,800 min-1 SAT.. 33.. 2,000 min-1 SAT.. 40.. 2,400 min-1 SAT.. 50.. 3,000 min-1 SAT.. 60.. 3,600 min-1 Display Seven LEDs show operating status version for installation in central control units, Power cable without incl. control potentiometer set Thyristor protection, via safety device (superflink) Network fluctuation compensation ± 10%, the vibration width remains constant Network tolerance, allowable voltage ± 10% Frequency ± 0.5% Vibration width change proportional to the desired value Switch activation (continuous contact, potential-free) or voltage signal +24 V (DC) or Optocoupler Inputs external external external command variables 0.. 10 V (DC), 0/4.. 20 mA (DC) AViTEQ PA or PAL vibration sensor input Outputs remote monitoring, relay output protective function When used on magnetic vibrators with integrated PAL sensor Versione SA.. -2 MV-... P (8V) Versions SA.. -2V MVE33-1, MVF33-1, MVF33-2, MVG33-1 (P), MVH33-1 (P) (10V) Voltage and oscillation width control with attack monitoring When used with an external PA sensor Version SA.. 2S1 Vibration Width Control Magnetic vibrator temperature switch monitoring When operating with multiple drives, additional TXAE board is required (version.. - 2X) |
default.send_request_amp_Group2