| BRAND | S+S REGELTECHNIK |
| Product | Premasgard 2125 |
| Description | Pressure, differential pressure and volume flow transducers |
| Internal code | IMP5009096 |
| Technical specification | power supply 24 V AC/DC (± 10%) power consumption < 1 W at 24 V DC; < 2 VA at 24 V AC Burden Ra (ohms) = 25... 450 ohms for I variant load resistance RL > 25 kOhm for U variant output switchable 0 -10 V/ 4... 20 mA (via DIP switch) circuit type 3-wire connection measurement function differential pressure, volume flow (radiated output signal) power consumption < 45 mA Measurement ranges Multi-range switching with 8 switchable measurement ranges media temperature —20... +50 °C (temperature-compensated 0... +50 °C) Pressure connection with connector for pressure hose Ø 6 mm Pressure range ±5000Pa Type of printing differential pressure Zero-point offset ± 5% measurement range Over -/low pressure ± 50 kPa Medium clean air and non-aggressive, non-combustible gases signal filtering switchable 1 s/ 10 s (via DIP switch) electrical connection 0.14 - 1.5 mm², via screw terminals cable fitting M 16 x 1.5; with strain relief, replaceable max. inner diameter 10.4 mm Long-term stability ± 1% per year hysteresis 0.3% EW precision (5000 Pa): typically ± 35 Pa at +25 °C compared to calibrated reference device parts in contact with media brass, Ni, Duroplast, Si, epoxy, RTV, BSG, UV silicone gel Pressure accuracy ± 35 Pa Temperature drift ± 0.1% per °C EW linearity < ± 1% EW Humidity < 95% RH, non-condensing air Pressure measurement range 0... +1000 Pa/-1000... +1000 Pa 0... +2000 Pa/-2000... +2000 Pa 0... +3000 Pa/-3000... +3000 Pa 0... +5000 Pa/-5000... +5000 Pa protection class III (according to EN 60 730) Protection class IP 67 (according to EN 60 529) housing tested, TÜV SÜD, report no. 713139052 (Tyr 1) cable connection plastic cable screw (M 16 x 1.5; with strain relief, replaceable, inner diameter 10.4 mm) or M12 connectors in accordance with DIN EN 61076-2-101 (optional on request) housings made of plastic, UV-resistant, Material polyamide, 30% glass ball reinforced, color traffic white (similar to RAL 9016), with snap-on lid Case dimensions 72 x 64 x 37.8mm (Tyr 1) standards CE compliance, electromagnetic compatibility in accordance with EN 61326, according to EMC Directive 2014/ 30/EU |
default.send_request_amp_Group2