| BRAND | S+S REGELTECHNIK |
| Product | PREMASGARD 7110-I LCD/ 1301-7112-4110-100 |
| Internal code | IMP4974844 |
| Technical specification | Power consumption < 2 VA/ 24 V DC, < 3.5 VA/ 24 V AC 15... 36 V DC power supply depending on the load, residual ripple stabilized ± 0.3 V Burden Ra (ohms) = (Ub -14 V)/0.02 A with I variant Circuit type 2 or 3-wire connection Measurement ranges Multi-range switching with 8 switchable measurement ranges Media temperature —20... +50 °C Pressure type differential pressure Zero-point offset < ± 0.7% EW ± 1.4% EW at pressure ranges < 250 Pa Over -/under pressure max. ± 100 hPa Medium clean air and non-aggressive, non-combustible gases Switchable signal filtering 1 s/ 10 s electrical connection 2 or 3-wire connection 0.14 - 1.5 mm², via screw terminal Case dimensions 126 x 90 x 50 mm (Tyr 2) M 16 x 1.5 cable connector; with strain relief Dimensions 126 x 90 x 50 mm (Tyr 2) Pressure range ±100Pa sum of liniarity+hysteresis < ± 1% EW ± 2% EW at pressure ranges < ± 250 Pa output 4... 20 mA Temp. drift values ± 0.1 %/ °C ± 0.3 %/ °C at pressure ranges < 250 Pa Humidity < 95% RH, non-condensing air Output signal 4... 20 mA Safety class III (according to EN 60 730) Protection class IP 65 (according to EN 60 529) when installed CE conformity standards in accordance with EMC Directive 2014/ 30/EU, according to EN 61326-1, according to EN 61326-2-3 Standard pressure connection with connector for Ø 6 mm pressure hose, optionally with stainless steel quick plug connection for PVC fabric pressure hose Ø 6 mm (outer diameter) Accuracy (100 Pa): typical ± 2 Pa compared to calibrated reference device Pressure accuracy ± 2 Pa Pressure measurement range 0... +50 Pa/-50... +50 Pa 0... +100 Pa/-100... +100 Pa Cable connection Plastic cable connector (M 16 x 1.5; with strain relief, replaceable, max. inner diameter 10.4 mm) plastic housing, UV-resistant, Material polyamide, 30% glass ball reinforced, with quick-release screws (slot/cross recess combination), color traffic white (similar to RAL 9016), The cover for the display is transparent! Equipment display with lighting, three-line, cutout approx. 70 x 40 mm (W x H), to display the actual pressure as well as the setting of the automatic zero point calibration |
default.send_request_amp_Group2