| BRAND | Labom |
| Product | PASCAL CV4110 |
| Description | Pressure Transmitter |
| Internal code | IMP4505168 |
| Custom code | 90262020 |
| Technical specification | CV4110 PRESSURE TRANSMITTER PASCAL CV4 for diaphragm seal operation see data sheet D4-016-7 R70 positioning process connection at back A1059 nominal range: 0...16 bar, Turndown max. 20:1, overload limit 60 bar; sensor type piezoresistiv F9 parameterizing: see below lower range value: - 1,0000 upper range value: + 5,0000 unit: bar Q2 accuracy: <= 0.15% from adjusted measuring span (Lin./Hys./Rep., up to Turndown <= 5:1 no changes) H21 output signal: 4...20 mA with HART protocol (Universal Commands) M21.1 high-resolution graphic display with backlight intuitive 4-button operation, quick access to device data available languages (English, German, Chinese), default setting English Y12 material case/window: stainless steel mat.-no. 1.4301/1.4305 (304/303), window non-splittering glass T1 degree of protection: IP 65 / IP 67 T30 electrical connection: circular connector M12 x 1 (4 pin) U1 temperature, ambient: -20...+80 °C W4020 marking: marking (adhesive label), see below W1201 INSPECTION CERTIFICATE DIN EN 10204 3.1 calibration certificate with 5 measuring points A420 connection of meas. instrument with temperature decoupler, directly welded L22 system filling: Synthetic oil, free of silicon FD1 acc. to FDA 21 CFR 178.3570 / H1-registered operating temperature range -10...+140 °C DF INLINE DIAPHRAGM SEAL for food / pharmaceuticals / biotechnology see data sheet D5-064 35 process connection: for pipes per DIN 11850 Tri-clamp connection on both sides 00 nominal width: pipe DN 15, pipe inside-ø 16 mm Tri-Clamp connection DN 3/4" / PN 25, outside-ø 25 mm HY hygienic design per EHEDG Doc.8 and ASME BPE SF3: surface roughness (wetted parts) - turned parts Ra <= 0.76 μm - diaphragm Ra <= 0.38 μm - weld seam Ra <= 0.76 μm F4 insertion length L: 96 mm G7 material wetted parts: diaphragm st. steel mat.-no. 1.4435 (316L), basic body st. steel mat.-no. 1.4404 (316L) W4035 ADDITIONAL DESIGN: wetted parts electropolished W1020 Components marked acc. to material inspection certificate per EN 10204-3.1, wetted parts W1223 INSPECTION CERTIFICATE DIN EN 10204 3.1 roughness height rating Ra |
default.send_request_amp_Group2