| BRAND | Hioki |
| Product | P9000-01 |
| Description | DIFFERENTIAL PROBE |
| Internal code | IMP796489 |
| Weight | 1 |
| Technical specification | Measurement functions Waveform monitor output only Frequency characteristics: DC to 100 kHz, -3 dB Waveform monitor output/AC RMS value output (switchable) Wave mode frequency characteristics: DC to 100 kHz, -3 dB RMS mode frequency characteristics: 30 Hz to 10 kHz; response time: 300 ms (rising) or 500 ms (falling) Division ratio 1000:1 or 100:1 (user selectable) DC amplitude accuracy ±0.5% f.s. (f.s. = 1.0 V; voltage division ratio: 1000:1) (f.s. = 3.5 V; voltage division ratio: 100:1) RMS amplitude accuracy n/a ±1% f.s. (30 Hz to 1 kHz non-inclusive, sine wave), ±3% f.s. (1 kHz to 10 kHz, sine wave) Input resistance, capacity Between H and L: 10.5 MΩ, 5 pF or less (at 100 kHz) Max. allowable input 1000 V AC/DC Max. rated voltage to earth 1000 V AC/DC (CAT III) Operating temperature -40˚C (-40˚F) to 80˚C (176˚F) Power supply (1) AC Adapter Z1008 (100 to 240 V AC, 50/60 Hz), 6 VA (including AC adapter) or 0.9 VA (probe only) (2) USB bus power (5 V DC, USB Micro-B receptacle), 0.8 VA To prevent an electric shock, when supplying power from the USB-microB terminal, please supply from a device which USB's GND terminal of the source device is grounded. (3) External power supply (2.7 V to 15 V DC) Dimensions and mass 128 mm (5.04 in)W × 36 mm (1.42 in)H × 22 mm (0.87 in)D, 170 g (6.0 oz), Cord length: Input: 70 cm (2.30 ft) ; output: 1.5 m (4.92 ft) |
default.send_request_amp_Group2