| BRAND | Hioki |
| Product | IM3570 |
| Description | Impedance Analyzer |
| Internal code | IMP314150 |
| Weight | 5.8 |
| Technical specification | Modes LCR mode, Analyzer mode (Sweeps with measurement frequency and measurement level), Continuous measurement mode Parameters Z, Y, θ, Rs (ESR), Rp, Rdc (DC resistance), X, G, B, Cs, Cp, Ls, Lp, D (tanδ), Q Range 100 mΩ to 100 MΩ, 12 ranges (All parameters are determined according to Z) Frequency 4 Hz to 5 MHz (5 digits setting resolution, minimum resolution 10 mHz) Signal Level Normal mode: V mode/CV mode: 5 mV to 5 Vrms (up to 1 MHz) 10 mV to 1 Vrms (1.0001 to 5 MHz), 1 mVrms steps CC mode: 10 μA to 50 mArms (up to 1 MHz) 10 μA to 10 mArms (1.0001 to 5 MHz), 10 μArms steps Low impedance high accuracy mode: V mode/CV mode: 5 mV to 1 Vrms (up to 100 kHz), 1 mVrms steps CC mode:10 μA to 100 mArms (100 mΩ and 1Ω ranges of up to 100 kHz), 10 μArms steps Time 0.5 ms (100 kHz, FAST, display OFF, representative value) General Specifications Display Range Z, Y, Rs, Rp, Rdc, X, G, B, Ls, Lp, Cs, Cp : ±(0.000000 [unit] to 9.999999G [unit], Absolute value display for Z and Y only θ : ±(0.000° to 180.000°), D : ±(0.000000 to 9.999999) Q : ±(0.00 to 99999.99), Δ % : ±(0.0000% to 999.9999%) Basic Accuracy Z ±0.08% rdg. θ: ±0.05° Output Impedance Normal mode: 100 Ω, low impedance high accuracy mode: 10 Ω Display 5.7" color TFT, display can be set to ON/OFF Functions DC bias measurement, comparator, BIN measurement (classification), panel loading/saving, memory function Interfaces EXT I/O (handler), RS-232C, GP-IB, USB communication, USB memory, LAN Power Supply 90 to 264 V AC, 50/60 Hz, 150 VA maximum Dimensions 12.99 x 4.69 x 12.09" (330 x 119 x 307 mm) |
default.send_request_amp_Group2