| BRAND | Labom |
| Product | GA2700-HY-A1031-C4990-G11-N2-T150-Z52 PA2430-F12-H1 |
| Description | (GA2700-HY RESISTANCE THERMOMETER MiniTherm for food / pharmaceutical / biotechnology according sheet T4-015 measuring resistor 1 x Pt 100, tolerance class A according to DIN EN 60751 A10 process connection: threaded connection 31 Nominal diameter: M12 x 1.5 conical sealing C4 Temperature sensor: ø 6 mm tapered for a diameter of 4 mm 990 Einaulänge U1 (in mm): 20 G11 material wetted parts: stainless steel material 1.4404 (316L) N2 measurement application: 1 x Pt 100-3-wire system, standard T150 electrical connection: circular connector M 12x1 (4 poles) Z52 including transmitter in a stainless steel housing with connector M12 (type PA2430) PA243 transmitter for temperature (Pt 100), programmed according to data sheet T4-082-1 electrical connection. round connector M12x1 (4-pole) 0 type: standard configuration F12 : see below measurement range: 0 ... + 150 ° C leakage current with sensor break: 22.8 mA, standard sensor offset: 0 ° C, standard steaming time: 0 s, standard H1 output: 4 ... 20 mA, 2-wire) |
| Internal code | IMP286715 |
| Weight | 1 |
| Custom code | 90251900 |
| Technical specification | RESISTANCE THERMOMETER MiniTherm for food/pharmaceuticals/biotechnology acc. to data sheet T4-015 measuring resistor: Pt100, tolerances per class A per DIN EN 60751 process connection: threaded connectionA10 nominal width: M12x1.5, conical seal31 temperature detecting element: ø 6 mm, reduced design to ø 4 mmC4 insertion length U1: [mm]: 20990 material wetted parts: stainless steel mat.-no. 1.4404 (316L)G11 measuring resistor: 1 x Pt100, 3-wire technology, standardN2 electrical connection: circular connector M12 x 1 (4 pins)T150 incl. transmitter into st. steel plug housing with locking plug M12 (type PA2430) Z52 TRANSMITTER for temperature (Pt 100), programmable see data-sheet T4-082-1 with circular connector M12x1 (4-pins) PA243 design: standard0 configuration: see belowF12 measuring range: 0...+150 °C error current if there is a sensor break 22.8 mA damping: 0 s, standard output signal: 4...20 mA, standard |
default.send_request_amp_Group2