| BRAND | Fluke |
| Product | ESA609 |
| Description | Electrical Safety Analyzer |
| Internal code | IMP4055119 |
| Technical specification | Range 90.0 to 264.0 V ac rms Accuracy ± (2 % of reading + 0.2 V) Earth resistance Modes Two wire Test current > 200 mA dc Range 0.000 Ω to 20.000 Ω Accuracy ± (1 % of reading + 0.010 Ω) Resistance tests Earth resistance and point to point Equipment current Mode AC RMS Range 0.0 A to 20.0 A Accuracy ± (5 % of reading + (2 counts or 0.2 A, whichever is greater)) Duty cycle 15 A to 20 A, 5 min on / 5 min off 10 A to 15 A, 7 min on / 3 min off 0 A to 10 A, continuous Leakage current Modes True-RMS Patient load selection AAMI ES1-1993 Fig. 1 IEC 60601: Fig. 15 Crest factor Less than or equal to 3 Ranges 0.0 µA to 1999.9 µA Accuracy DC to 1 kHz ± (1 % of reading + (1 µA , whichever is greater)) 1 kHz to 100 kHz ± (2.5 % of reading + (1 µA, whichever is greater)) 100 kHz to 1 MHz ± (5 % of reading + (1 µA, whichever is greater)) Leakage tests Ground wire earth Chassis (enclosure) Direct equipment Point to point Temperature Operating 0 °C to 50 °C (32 °F to 122 °F) Storage -20 °C to 60 °C (-4 °F to 140 °F) Humidity 10 % to 90 % non-condensing Altitude 120 V ac mains supply voltage 5000 m 230 V ac mains supply voltage 2000 m Display LCD display Modes of operation Manual Power ratings 115 volt power outlet 90 to 132 V ac rms, 47 to 63 Hz, 20 A maximum 230 volt power outlet 180 to 264 V ac rms, 47 to 63 Hz, 16 A maximum Power input 115 V 20 A - 2.6 kVA and 230 V at 16 A - 4.2 kVA |
default.send_request_amp_Group2