| BRAND | Stober |
| Product | ED401USABCRO140 |
| Description | Synchronous servo motor |
| Internal code | IMP4025573 |
| Custom code | 85015100 |
| Technical specification | MV0000003641 Synchronous servo motor ED401USABCRO140 Standstill current 1.61 A. Nominal current 1.54 A. Standstill torque 2.51 Nm Motor torque 2.36 Nm Engine speed 3,000 rpm Motor power 0.74 kW ED / EK type designation motor ED401USABCRO140 Type of cooling convection cooling IC Output side IEC # 98 PR 95 LK 115 Shaft design Ø14x30 with feather key Drive controller manufacturer STOBER Encoder connector BG / type STOBER drive controller con.23 Intermediate circuit voltage 540V intermediate circuit voltage Drive controller type / MDS 5000 connection Connection diagram 442561 Encoder type EnDat singleturn digital Encoder type Ind.2.1 ECI 1319 Nominal speed nN 3000 1 / min 540V (KEM = 140) ED Connector type angle rotatable Mating connector Without mating connector Power connection plug connector 8-pin con.23 Connector position 270 ° Cable entry left * Thermal winding protection PTC in the power connection Ambient temperature -15 to + 40 ° C standard Thermal class (VDE 0530) 155 F Degree of protection (EN 60529) IP56 (EN 60529) Servomotors S1 Operating mode Painting K / 1-layer painting Color RAL 9005 deep black Painting options Abrasion not painted Documentation language German Documentation language English We recommend that the motors and drive controllers function properly to use coordinated cables from our company. When using unsuitable connection cables we reserve the right to exclude warranty claims. Attention, the plug connectors on the motor are designed in SpeedTec® as standard. Cables with screw-type plugs can also be used for connection. In this case the O-ring no.5050023 (con.23) / 5050040 (con.40) must be attached to the motor connector can be retrofitted to avoid unintentional loosening of the connection (vibration). |
default.send_request_amp_Group2