| BRAND | Demag |
| Product | DC-Pro 5-500 1/1 H5 V8/2 380-415/50 |
| Description | chain hoist |
| Internal code | IMP3300473 |
| Weight | 30 |
| Custom code | 84251100 |
| Technical specification | DEMAG - electric chain hoist DC-Pro 5-500 1/1 H5 V8/2 380-415/50 The Demag DC-Pro chain hoist meets all the requirements of a quality Demag product and sets Industry standard standards for hoists. It is a highly flexible chain hoist that can be used within can be installed and put into operation in a very short time. The DC-Pro is characterized by high Ease of use, high productivity, optimal use of room height and maximum reliability and is both meets the economic and safety-relevant requirements of a modern hoist. The following equipment is included in the standard package: - Contactor control with 24V control voltage (with internal tri-state signal transmission) - An operating limit switch for the highest and lowest hook position, to safely shut off the chain hoist in the final positions - An operating hours counter that can be read from the outside - Two standard lifting speeds as main and fine lift - The speed-monitored brake and clutch principle ensures a high level of safety and a long service life - The transmission, brake and clutch are maintenance-free for up to 10 years - For service purposes, the operating parameters can be controlled via a visual display or wirelessly via the built-in The infrared diagnostic interface can be read from the chain control - All electrical connections of the chain hoist are pluggable - A central service room that provides quick and direct access to all important plug connections and enables simple chain lubrication - Quick and easy chain drive change without dismantling the motor or transmission parts Supply network Line voltage 400 V Line frequency 50 Hz Three-phase power supply Chain hoist technical data Load capacity 500 kg FEM/ISO group 2m+/M5+ (20% more than 2m/M5) Hook path 5 m Control cable length 0.8 - 3.8 m Shearing 1/1 Lifting speed approx. 8/2 m/min Control voltage 24V AC Hoist voltage 380-415 V/ 50 Hz ZNK 80 B 8/2 lift motor Switch-on time 40/20% Rated power 0.73/0.18 kW Protection class IP 55 Insulation class F Ambient temperature -20°C to +45°C C size 416 mm Surface protection and coloring Lifting unit colour RAL 5009 azure blue High-quality powder coating on the aluminum components of the chain hoist provides excellent corrosion protection. chain storage Standard chain storage designed for 5 m hook travel control unit control line with control switch Control switch: DSC Control cable: height-adjustable standard control cable 0.8 - 3.8 m Other selected options: documentation EU documents in accordance with the Machinery Directive |
default.send_request_amp_Group2