| BRAND | Carlo Gavazzi |
| Product | DBA52CM24 |
| Description | FUNCTION Delay on release OUTPUT SIGNAL 1 |
| Internal code | IMP247408 |
| Weight | 1 |
| Technical specification | Timers Delay onRelease Type DBA52 • Time range 0.1 s to 100 h • Knob selection of time range • Knob-adjustable time setting • Repeatability: ≤ 0.2% • Output: 5 A SPDT relay • For mounting on DIN-rail in accordance with DIN/EN 50 022 • 17.5 mm DIN-rail housing • Combined AC and DC power supply • LED indication for relay status and power supply ON Product DescriptionOrdering Key DBA 52 C M24 Multi-voltage delay on release timer with 7 knob selectable time ranges with- in 0.1 s and 100 h. Type Selection For mounting on DIN-rail. Housing Function Type Item number Output Power supply MountingOutput HousingSupply: 24 VDC and 24 to 240 VAC DIN-railSPDT D-Housing DBA 52 C M24 TimeSpecificationsOutput Specifications Time ranges Knob Selectable0.1to 1 s 1 to 10 s 6 to 60 s 60 to 600 s 0.1to 1 h 1 to 10 h 10 to 100 h Setting accuracy≤ 5% Repeatability≤ 0.2% Time variation Within rated power supply ≤ 0.05%/V Within ambient temperature≤ 0.2%/ºC Reset Manual reset of time and/or relayClose the trigger contact between pins A1 and Y1 Pulse duration≥ 100 ms Power supply interruption≥ 200 ms Output SPDT relay Rated insulation voltage 250 VAC (rms) Contact Ratings (AgSnO2)µ Resistive loadsAC 1 5 A @ 250 VAC DC 125 A @ 24 VDC Small inductive loads AC 15 2.5 A @ 250 VAC DC 132.5 A @ 24 VDC Mechanical life ≥ 30 x 106 operations Electrical life ≥ 105 operations (at 5 A, 250 V, cos ϕ = 1) Operating frequency< 7200 operations/h Dielectric strength Dielectric voltage 2 kVAC (rms) Rated impulse withstand volt. 2.5 kV (1.2/50 µs) Supply Specifications Power supply Overvoltage cat. II Rated operational voltage (IEC 60664, IEC 60038) through terminals: A1, A224 VDC ±15% and 24 to 240 VAC +10%/-15%, 45 to 65 Hz Voltage interruption ≤ 10 ms Rated operational power AC supply 4 VA DC supply 1.5 W Specifications are subject to change without notice (21.07.08)1 |
default.send_request_amp_Group2