| BRAND | Labom |
| Product | CS2110-A1090-H11-N71-T31-K1085-W4020-W2002 DF3410-HY-F2-A4007-L22 |
| Description | pressure transmitter |
| Internal code | IMP1796850 |
| Weight | 0.9 |
| Custom code | 90262020 |
| Technical specification | CS2110 PRESSURE TRANSMITTER/PRESSURE SWITCH PASCAL CS for diaphragm seal operation, hygienic, see data sheet D4-017-42 A1 pressure sensor: piezoresistive for gauge pressure 090 measuring range -1...5 bar, overload limit 20 bar measuring accuracy: linearity, hysteresis, repeatability <= 0.2 % of span H11 output signal: 4...20 mA, 2-wire technology N71 switching output: 2 floating contacts with common power supply (PNP), switching capacity 30 VDC, 200 mA T31 electrical connection: circular connector M12x1 (8 pins) K1085 design: standard W4020 ADDITIONAL DESIGN: marking (adhesive label), see below W2002 CALIBRATION PROTOCOL: with 5 measuring points DF INLINE DIAPHRAGM SEAL for food / pharmaceuticals / biotechnology see data sheet D5-064 34 process connection: for ISO 1127-pipes clamp connection on both sides per ISO 2852 10 nominal width: pipe DN 33.7, pipe inside-ø 29.7 mm clamp connection DN 25 / PN 25, outside-ø 50.5 mm HY hygienic design per EHEDG Doc.8 and ASME BPE SF3: surface roughness (wetted parts) - turned parts Ra <= 0.76 µm - diaphragm Ra <= 0.38 µm - weld seam Ra <= 0.76 µm F2 insertion length L: 110 mm A400 connection of meas. instrument directly welded 7 material wetted parts: diaphragm st. steel mat.-no. 1.4435 (316L), basic body st. steel mat.-no. 1.4404 (316L) L22 system filling: Synthetic oil, free of silicon FD1 acc. to FDA 21 CFR 178.3570 / H1-registered operating temperature range -10...+140 °C |
default.send_request_amp_Group2