| BRAND | Globtop |
| Product | CFIB- 2- ME.IP- V3.T |
| Internal code | IMP4682155 |
| Custom code | 90330000 |
| Technical specification | Cable entry: No. 3 3/4" npt-f - Terminal block: 8 clamps plus ground connection (option 12 clamps) - Degree of protection: IP66/67 - Surface treatment: chrome plating (according to MIL5541 class 1A) + polyester coating (RAL7000) (maximum resistance to chemical and atmospheric agents) - Position indicator: three-dimensional red-green dome - Shaft: namur coupling - 316 stainless steel material N° 2 mechanical circuit finishers and No. 1 4÷20mA transmitter will be mounted in each case a microprocessor with the following characteristics: transmitter - Supply voltage: 10÷28.8 Vdc - Nominal delivery current: 4÷20 mA (for maximum range of variation; see diagnostic table 1) - Current resolution: ± 4 µA (0.09° on 360°) and ± 15 µA (0.09° on 90°) - Calibration accuracy: ± 0.2% F.S. - Linearity: ± 0.5% F.S. + linearity of the potentiometer - Hysteresis: nothing - Repeatability: equal to the resolution of the potentiometer - Minimum/maximum span: 20°/330° assuming a maximum rotation of 360°. - Potentiometer ohmic value: 10 kΩ - Potentiometer power supply: 2.5Vdc (reference voltage internal to the board) - Temperature range: -40°C ÷ +85°C - Temperature coefficient: 2.5 µA/°C - Damping (63% of the instantaneous signal variation from 4 to 20mA): 1.2 sec (default) 0 ÷10KΩ resistive potentiometer with conductive plastic element (Specific model for the position transducer function) - Potentiometer linearity: ≤± 0.5% maximum - Resolution: practically infinite - Absorbed power: 1W at 70°C - Working temperature: - 40°C ÷ + 125°C Mechanical limit switches - multifunctional V3 series mechanical limit switch (Crouzet) - mechanical contact (dual current): SPDT with gold-plated contact - contact flow rate (dc): from 1mA @ 4Vdc up to 5A @ 24Vdc - resistive load - contact flow rate (ac): from 1mA @ 4Vac up to 5A @ 240Vac- resistive load - working temperature: see case certification temperature - enclosure: plastic material |
default.send_request_amp_Group2