| BRAND | Labom |
| Product | CC6010-A1053-H3-F2-T999-W4999 A400-L23-T99 Z99 |
| Internal code | IMP4924005 |
| Custom code | 90262020 |
| Technical specification | CC6 PRESSURE TRANSMITTER COMPACT for diaphragm seal operation 01 design: standard see data sheet D4-020-5 0 explosion protection: without A1 pressure sensor piezoresistive for gauge pressure 053 measuring range 0...1 bar, overload limit 3 bar measuring accuracy: linearity error incl. hysteresis < + 0.2 % f.s. accuracy of adjustment < +/- 0.2 % f.s. H3 output signal: 4...20 mA, 3-wire technology F2 calibration: position of process connection 03:00 or 09:00 o' clock T999 electrical connection: see below Electrical connection: angled round plug with screw connection and special nut similar to drawing d4052 according to SBV_019, each item 5, angle coupling M12x1 Length: 5 m. cable W4999 ADDITIONAL DESIGN: see below Fill device after coating Set the device at 35°C Sticker on the device with "device set at 35°C coating Impreglon SafeCoat 999-70/2-N" A400 connection of meas. instrument directly welded L23 system filling: Synthetic oil, free of silicon FD1 acc. to FDA 21 CFR 178.3570 / H1-registered DMB_7014 T99 temperature, media: Processtemperatur limited to: +20...+130°C Z99 process connection: see below SPECIAL PRODUCT SPECIAL SCREW PRESSURE DIAPHRAGM with front-flush membrane Process connection: M22x1 according to drawing PC-CA-00013-k (SBV_019) with milled groove in the sealing surface and O-ring Film coated by Impreglon with SafeCoat coating 999-70/2-N LV_023 Temperature coefficient = 9mbar / 10K basic body material: stainless steel mat.-no. 1.4435 (316L) diaphragm material: stainless steel mat.-no. 1.4435 (316L) |
default.send_request_amp_Group2