| BRAND | Steimel |
| Product | BT1-A031R / T1-60G |
| Internal code | IMP4625873 |
| Custom code | 84136039 |
| Technical specification | pump free shaft ATEX gear pump PTFE, GD, EC, AW, G3/4, M37GN/10+K+R, preb.f.KL (YBX469), GGK shaft Gear pumps: T1-60G according to Directive 2014/34/EU (ATEX) Item number: BT1-A031R Dimension sheet: DPP001-A031R Spare parts list (pump only): DET001-A031R Operating instructions: DBA-ZP02 + DBA-ZP-ATEX-01 Suction and discharge connection: G ¾ Material finish: Housing parts: EN-GJL-250 (EN-JL 1040) Drive and counter pinion: 16 MnCrs 5, hardened straight-toothed Shaft seal: mechanical seal M 37 GN/10+K+R Q12Q1KGG1 Elastomers of the mechanical seal: Kalrez temperature monitoring on the mechanical seals: prepared for1 PTC thermistor Display device: on-site Bearing Bushings: Bronze AW increased bearing clearance: without Case seal: Loctite other elastomers: PTFE Extraction hole: without Pumped medium: paints and varnishes solvent-based, pigment-containing, max. 100 μm grain size Concentration: 10 - 70% Viscosity: 1,000 - 2,000 mm2/s Temperature: max. 70 degrees C rinsing with solvent (viscosity 30 - 1000 mm2/s) approx. 10% of the passage of time Delivery data: Q: 0 - 300 L/h p: 0 - 3 bar (pump must suck) n: 0 - 250 rpm direction of rotation: right Test run: yes, with HLPD 46 Pre-cleaning: rinse with mineral spirits Paint: RAL 5009 (HDE) Silicone-free pump! The pump was tested with mineral oil and must be flushed on site before commissioning! Sign: EAY924-PL02 Identification plate: ETY924-D-E—PE03 ATEX marking: II 2G Ex h IIB T3 Gb X Please observe the provisions of Directive 2014/34/EU (ATEX) regarding the use of our pumps in hazardous areas. Prerequisite for operation according to: Ex zone 1 (gas), temperature class T 3, Ambient temperature -20 to 40°C Explosion group IIB. Attention: Before starting the pump, the temperature monitoring can be connected functionally! |
default.send_request_amp_Group2