| BRAND | Bauer |
| Product | BK60-13UW/D11MA4-TF-D-S/ES040A9HA/SP |
| Description | Motor reducer |
| Internal code | IMP4973896 |
| Custom code | 85015220 |
| Technical specification | Article number: 189C5459 Bevel gear motor with single-disc spring-brake BK60-13UW/D11MA4-TF-D-S/ES040A9HA/SP Motor power: 4.0 kW AW speed: 28.5 r/min Lineup: H4 Terminal box location: II/A Corrosion protection: standard Painting: RAL 7031 Dimension diagram: BK60-BK60Z; N-SD Catalogue: DG 07 Net weight per piece: approx. 136 kg Additional/special versions: Suitable for ambient temperatures of -40 to 40°C. Suitable for operation with static inverters in the frequency range: 5 - 50 Hz Voltage: 61 - 400 V Y Power: 0.245 - 4 kW synchronize. Speed: 2.9 - 29.5 r/min Load torque: 800 - 1330 Nm Load current approx.: 8.5 A Operating factor: 1.75 Gearbox design: Type: BK60 3-stage bevel gearbox Design code 13UW Foot with through holes on the bottom of the page Pin shaft on both sides (d: 70 mm) Total reduction i: 50.40 Additional/special versions: With double shaft sealing on the working shaft. Lubricant grade: PAO68 With Heinrichs vent. Engine design: Type: three-phase cage rotor motor D11MA4-TF-D-S Design speed: 1420 r/min Voltage: 400 V Stator circuit: Y Frequency: 50 Hz Rated current: 8.5 A cos phi power factor: 0.83 Warmth class: F IP protection class according to EN 60529: IP 65 IC cooling type according to EN 60034-6: IC 411 Terminal box: KAG3 Design in accordance with DIN VDE 0530-1/EN 60034-1 Additional/special versions: With built-in thermistors for shutdown according to additional connection diagram ZK010.1040-14. With protective cover. Fan blades made of aluminum. With Klüber Petamo GHY 133 engine bearing grease Brake design: holding brake under the fan cover Type: Single disc spring brake ES 040 A 9 HA Setting value: 40.0 Nm IP protection class according to EN 60 529: IP 65 coil voltage: 180 V coil current: 0.33 A Additional dimension diagram: N-BR Cable design, connection ends of the magnetic coil routed to the rectifier in the motor terminal box. Additional/special versions: With lockable hand ventilation. With standard rectifier built into the motor terminal box Type: SG 3.575 B AC supply voltage: 380.. 420 V (50/60 Hz) Connection current: 0.23 A DC output: 180 V Please note: motor Motor connection is made via CAGE-CLAMP (cage tension spring technology)! CAGE CLAMP is a registered trademark of WAGO Please check whether the allocation of voltage and frequency for motor and inverter is the same. |
default.send_request_amp_Group2