| BRAND | Boll Kirch |
| Product | 6.60 Gr 50 DN 50 |
| Description | filters |
| Internal code | IMP4965147 |
| Custom code | 842199 |
| Technical specification | Filter type 6.60TI1 Size 50TI1 Connection diameter DN 50TI1 WN165 connection flanges, square flangesTI1 Dimension sheet Z42189TI1 TIU2 --- OPERATING CONDITIONS --- Fluid coolant TI1 to be filtered PED 2TI1 fluid group Fluid type according to PED liquid TI1 Maximum allowable pressure 16.00 BarTi1 Permit Operating temperature min 1.00 °CTI1 Permit Operating temperature max 80.00 °CTI1 TIU2 --- BACKWASH --- Clean/dry air backwash medium max.4bARTI1 Rinsing time 8 stI1 Air control medium 4-10bar ISO 8573-1:2010 (7/4/4) TI1 Flushing volume per chamber and flush 9.00 litresTi1 Purge air requirement per flush 0.010 Nm³Ti1 Control voltage 24 V DCTI1 WITHOUT/NONE control -- CONSTRUCTION/APPROVAL --- Design and layout PED2014/68/EU AD-2000TI1 Article 4, paragraph 3TI1 Container volume 15.00 literPressure test according to Boll & KirchTi1 TIU2 --- MATERIALS --- Filter housing made from EN-GJS-400-15TI1 VitonTi1 seal Seals made from VitonTi1 TIU2 --- FILTER ELEMENTS --- Item type Tissue screw plug TI1 No. of filter elements per 6TI1 chamber No. of 2TI1 filter chambers Candle headpiece and end piece made of CrNi steel Ti1 1.4401TI1 fabric Fabric number 208/26TI1 Average filtration result 20 μmTi1 Screen area in operation 2208 cm²Ti1 Total screen area 4416 cm²Ti1 TIU2 --- ACCESSORIES --- Attached differential pressure indicator 4.36.2 (optical + electrical) TI1 VitonTi1 differential pressure indicator sealant Differential pressure setting backwash 0.35 bar/alarm 0.50 barTi1 Counterflan. Screws and gaskets includedTI1 --- Accessories/differential pressure measurement---CAT DDA wired with M12x1 connector n. Z44446 STDTI1 --- ACCESSORIES/ELECTRICAL---CAT E-parts with M12 connector incl.TI1 TIU2 --- CORROSION PROTECTION --- Exterior primer 2K-Ep RAL 7034 100-200 μmTi1 Shell Tellus S2 M 32TI1 interior preservation TIU2 --- MARKING --- Operator/factory plate German/EnglishTI1 NachTi1 label TIU2 --- DOCUMENTATION --- Language of the operating instructions in German/EnglishTI1 Declaration of conformity included |
default.send_request_amp_Group2