| BRAND | Warex |
| Product | Type DKZ 110 APS DN 300 |
| Description | Butterfly Valve |
| Internal code | IMP4687294 |
| Technical specification | to clamp between flanges in accordance with EN 1092, PN 10 Silumin housing 1.4408 stainless steel flap disc - with increased gap size - Stainless steel 1.4057 or higher quality shafts Shaft sealing with O-rings Brass shaft bearing - socket Black Buna CB sealing collar Replaceable in the housing Can be pneumatically clamped against the valve disc < APS > other attachments: Pneumatic rotary drive AT 220 DR double-acting Required control pressure 6.0 bar Limit switch box with 2 sensors P+F NBB2-V3-E2 3-wire, PNP, contact, 10-30 V DC, IP 67 built into the housing and wired to a terminal block To indicate the position to close (upper sensor) + Open (lower sensor) El. /peum. Control for APS flaps ** 1 signal control ** El. /pneum. Control for butterfly valves Type: DKZ 110/ 103 and DKZE < APS > for opening and closing butterfly valves of the series < APS > and at the same time Controlling the pressure applied to the Sealing collar, consisting of: 1 piece 5/2 way solenoid valve, Colour: Norgren Herion, Type: 2623077.3037 Voltage: 24 V DC 2 piece exhaust throttle valves for solenoid valve 1 piece of Pneum Parker pressure switch, type PWS-C5149 1 piece mounting plate for Namur valve 1 piece quick vent valve L-SEV-1/4 mSv (from DN 350, two quick exhaust valves) 1 piece pressure control valve incl. Pressure gauge 0-10 bar including necessary screws and fasteners Implementation in accordance with tax plan 0003475h |
default.send_request_amp_Group2