| BRAND | Warex |
| Product | Type DKZ 110 APS DN 100 |
| Description | Butterfly valve |
| Internal code | IMP4687290 |
| Technical specification | Construction length 39 mm to clamp between flanges in accordance with EN 1092, PN 10 Silumin housing 1.4408 stainless steel flap disc - with increased gap size - Stainless steel 1.4057 or higher quality shafts Shaft sealing with O-rings Brass shaft bearing - socket Black Buna CB sealing collar Replaceable in the housing Can be pneumatically clamped against the valve disc < APS > other attachments: Pneumatic rotary drive AT 60 DR double-acting Required control pressure 6.0 bar APS control 1002 1-channel control plan 0003475h 1x quick vent valve 1/4", with pressure regulator Throttle silencer 1/4" MS-Verz. 5/2 way solenoid valve function Norgren 2623077.3037 24 V DC, 1.6 W, IP 65 Namur version Limit switch box with 2 sensors P+F NBB2-V3-E2 3-wire, PNP, contact, 10-30 V DC, IP 67 built into the housing and wired to a terminal block To indicate the position to close (upper sensor) + Open (lower sensor) Characteristics: free-flowing, chemically neutral, Not prone to baking Working pressure: 3.0 bar Max. admissible Operating pressure: 4.0 bar (Ps) MAWP (Note: MAWP = Ausl. -Pressure) Operating temperature: 0 °C... + 60 °C (Ts) MAWT Surround. -Temperature: 0 °C... + 50 °C (Ta) Ex protection: no requirement evaluation of butterfly valves in accordance with DGRL 2014/68/EU, Diagram 7, certified module A2. The valves are subject to conformity assessment. Test pressure: design pressure x 1.1 bar for tightness |
default.send_request_amp_Group2