| BRAND | Leybold |
| Product | 960703A20V3001 |
| Internal code | IMP4272771 |
| Technical specification | SOGEVAC SV300 B Air cooled ATEX CAT.2 inside rotary vane vacuum pump, single-stage, oil sealed, air-cooled. With integrated oil mist separator and automatic oil recirculation, certified according to EC Directive 2014/34/EU from February 26, 2014 for: - internal category 2 for the gases of classes up to IIB temperature class 180°C at 50Hz and T3 (200°C) at 60Hz (according to IEC 60079-20- 1:2010) no Atex certification outside, for ambient temperature from 10 to 40°C. Gas inlet temperature: shall not exceed 60°C if the intake pressure is higher than 10 mbar, and 100°C under this pressure. - Identification II (i) 2G b IIB 180°C at 50Hz, and T3 at 60Hz (10°C <Ta < 40°C) X. Box contents of the pump: - suction nozzle valve, - with permanent gas ballast 15 m3/h with 1/2 G connection thread for inert gas supply - With temperature sensor PT100 (4-wire) for temperature monitoring of the pump part, (Shutdown setting: 105°C). - With connection for oil box pressure measurement. - with FKM static seals and PTFE shawrings - with drain valve and oil filter, - supplied loose with the second type plate. Non-ferrous metal pump in the oil circuit. final final pressure without gas ballast <= 0.15 mbar Final total pressure with gas ballast <= 0.7 mbar. Nominal pumping speed: 280 m3/h at 50 Hz Nominal pumping speed: 340 m3/h at 60 Hz Pumping speed: 240 m3/h at 50 Hz Pumping speed: 290 m3/h at 60 Hz - with world three-phase motor 200V -15%... 230V +10%/380... 400V +/ -10% ,50 Hz, 5.5 kW 200V -15%... 230V +10%/380... 400V +/ -10% & 460V +/ -10% ,60 Hz, 6.6 kW The engine is equipped with thermistors on the 3 fitted windings. Inlet & outlet connections: G2, synthetic ester oil LEYBONOL LVO210, Oil filling min/max: 8.5/11.5 l, the use of PAO synthetic oil LVO300 is also possible. |
default.send_request_amp_Group2