| BRAND | Labom |
| Product | 2007005/10/001 |
| Description | PRESSURE TRANSMITTER PASCAL CV |
| Internal code | IMP4776241 |
| Custom code | 90262020 |
| Technical specification | Order Code: CV3110-A1059-F80-H1100-M1-N51-T6-T31-K1085-W4020-W1201-W2 602 DL8080-HY-D58-G7-A400-L22-W1020 CV3110 PRESSURE TRANSMITTER PASCAL CV, for diaphragm seal operation, hygienic acc. to data sheet D4-017/22 A1 pressure sensor: piezoresistive for gauge pressure 059 nominal range: 0...16 bar, overload limit 60 bar measuring range setting: turndown 5:1 accuracy: <= 0.15% of measuring span (linearity, hysteresis and repeatability) F80 measuring range: setting see below lower range value: - 1,000 upper range value: + 15,000 unit: bar H11 output signal: 4...20 mA, rising characteristic (standard) 0 setting damping: 0.0 sec. (standard) 0 setting alarm state: < 3.6 mA (standard) M1 display module: without screw cap closed, without window N5 switching module: with 2 floating channels, pluggable, electrically isolated at all sides, switching capacity 30 V DC / 0.5 A 1 switching module setting: at the factory, see below 1. switch contact: 2. switch contact: T6 case: hygienic design with screw cap material: stainless steel degree of protection: IP 66 incl, vent filter, stainless steel T31 electrical connection: circular connector M 12x1 (8 pin) K1085 design standard W4020 ADDITIONAL DESIGN: marking (adhesive label), see below W1201 INSPECTION CERTIFICATE DIN EN 10204 3.1 calibration certificate with 5 measuring points W2602 functional safety per EN 61508, classification in SIL2 TÜV-Reg.-no. 44 799 13190201 DL8080 DIAPHRAGM SEAL, VARIVENT® for VARINLINE® access unit see data sheet D5-024-1 HY hygienic design per EHEDG Doc.8 and ASME BPE SF3: surface roughness (wetted parts) - turned parts Ra <= 0.76 µm - diaphragm Ra <= 0.38 µm - weld seam Ra <= 0.76 µm D58 VARIVENT® connection Form N (D = 68) for VARINLINE® access unit, PN 25 G7 diaphragm material: stainless steel mat.-no. 1.4435 (316L) A400 connection of meas. instrument directly welded L22 system filling: Synthetic oil, free of silicon FD1 acc. to FDA 21 CFR 178.3570 / H1-registered operating temperature range -10...+140 °C W1020 Components marked acc. to material inspection certificate per EN 10204-3.1, wetted parts Spare part for fabrication no. 2007005/10/001 |
default.send_request_amp_Group2