| BRAND | Warex |
| Product | DKD110 DN 300 |
| Description | butterfly valve |
| Internal code | IMP4580752 |
| Technical specification | overall length 78 mm for clamping between flanges according to EN 1092, PN 10 metallic sealing - closure-tight not pressure-tight in passage!! Leakage 1-2% area equivalent Silumin housing with earthing connection Flap disc made of stainless steel 1.4408 grounded - polished Ra < 0.8μ - fitted in the housing with a striking fit Shafts made of stainless steel 1.4057 or higher quality Shaft bearing in brass - bushing Shaft sealing by means of O-rings Special version: Sealing ring made of stainless steel 1.4301 or equivalent shrunk in the housing with phase to 300 mm on both sides Version with square on both sides (do not use grub screw) Shaft sealing by means of Viton O-rings+seal rings (both sides) further attachments: Pneumatic rotary actuator AT 300 DR double-acting required control pressure 6.0 bar Solenoid valve 5/2 way function Airtec KN-05-510-HN-B12 24 V DC, IP 65 Namur version with solenoid coil 23-SP-040-B12 Wet magnet 0558 50.1-00/5147 cat. II 3G EEx nA II T5 cat. II 3D T 95°C |
default.send_request_amp_Group2