| BRAND | AREXONS |
| Product | 0096 Motorsil D 60 gr. same as 0096 - MOTORSIL D (tube 60 g) (chemical) |
| Description | silicone joint |
| Internal code | IMP588999 |
| Weight | 1 |
| Technical specification | SEAL SILICON ORIGINAL (-70 ° C + 300 ° C) - Single component elastomer type acetic acid. - Cured at room temperature. - Good resistance to temperature, water, humidity. - Excellent resistance to oils. - Good dielectric properties. - Excellent resistance to tearing. - High degree of shock absorption. - Good resistance to mechanical stress. - Operating temperature: -70 ° C to + 250 ° C with peaks of 300 ° C. - Does not harm catalytic converters. - Easy to remove. - Product for sealing gaskets, form a gasket of any thickness. - Allows you to create dynamic and flexible couplings. - Fills microspaces due to non-perfect flatness, replacing all types of cut gaskets. - Self-leveling, hardens without volume loss. Crosslinks at room temperature for action of moisture. Before the cross-linking: - Appearance = leveling Pasta - Color = Red - Cure = acetic - Density = 1.120 g / ml - Viscosity = 250,000 cPs - Volatile% = 3% ca. After curing: - Shore hardness A = 50 - Elongation at break = 200% - Tensile strength = 4.5 MPa - Modulus of elasticity (100% elongation) = 1.8 MPa - DCR (remaining compression set) = 35% - Forming time skin = 10 minutes ca. - Cross linking time = 4.5 mm / 24 h Operating temperature: - Continuous = - 70 ° to + 250 ° C - for bits = up to 300 ° C - The product, after curing, resists to water, fuel, mineral and synthetic oils, liquids for radiators. |
default.send_request_amp_Group2