| BRAND | UE Systems |
| Product | UP2000ATEX kit |
| Internal code | ONR4144300 |
| Technical specification | UP2000ATEX ConstructionHand-held metered pistol type made with aluminum and ABS plastic CircuitrySolid State heterodyne receiver with temperature compensation FrequencyFrequency Detect ultrasonic frequencies between 20 kHz and 100 kHz, continuously variable Frequencies are converted to 50 kHz to 3 kHz audio ModulesScanning Module patented Trisonic plug-in type consisting of a phrased array of multiple transducers for airborne ultrasound. This module is shielded against RF interference. Rubber Focusing Cone (flexible) slips over scanning module to concentrate conical directivity and to shield reception of stray ultrasound. Also fits over Stethoscope Module to shield against high ambient ultrasound while unit isat maximum sensitivity. Stethoscope Module – Plug-in type, insulated module with RF shielding; 11,4 cm (4 1/2′) long stainless steel probe tip, conically shaped for uniform surface contact. Stethoscope Extension Rod Set: 3-piece, segmented metal rods to increase stethoscope contact range for 50,8 cm (20”) and 76.2 cm (31”). TransmitterPatented warble tone transmission HeadsetNoise isolating type: Double headset wired monophonic. Impedance 16 ohms. Over 23 dB os noise attenuation. Meets or exceeds ANSI specifications and OSHA standards. For hard hat use IndicatorsBallastic output meter; linear calibration scale of 0-100 for logging relative measurements. Meter is accurate 1% throughout entire scale. Low Level Battery LED indicator for main housing internal power supply BatterySelf contained NiMH rechargeable. RECHARGING SYSTEM: Standard 110V. Also availible in 220V FeaturesFrequency Tuning Adjustment Dial: 20-100 kHz with “fixed band” position for ultra-narrow frequency response. Bi-Modal Meter Switch for logarithmic and linear meter scale adjustments. Optional Auxiliary Mode selection for chart recorder output: 0-50 mV. Sensitivity Control – Precision 10-turn adjustment dial with numerically calibrated sensitivity increments for finite gain adjustment. Spring loaded trigger switch Overall SizeComplete kit in Zero Halliburton aluminum carrying case: 18.5 x 14.5 6.5 (47 x 37 x 17 cm) Pistol unit: 2 lbs. (0.9 kg.) Complete carrying case: 14 lbs. (6.4 kg) SensitivityDetecs 0.005" (0.127 mm) diameter leak @ 5 psi (0.34 bar) at a distance of 50 ft. (15.24 m) Threshold1 x 10-2 std. cc/sec to 1 x 10-3 std. cc/sec |
Press on flag images to see contact information!
