| BRAND | Steimel |
| Product | T 3 - 80 P - GKGM |
| Description | gear pump |
| Internal code | ONR4760920 |
| Technical specification | in accordance with Directive 2014/34/EU (ATEX) Item number: AT3-211857U Item No. (pump): BT3-A031U Dimension sheet: DPA003-130146U Dimension sheet (pump): DPP003-A031U Spare parts list (pump): DET003-A031U Operating manual: DBA-ZP02 : DBA-ZP-ATEX-01 Suction and pressure connection: G 1 Material design: Body parts: EN-GJL-250 (EN-JL 1040) Drive and counter sprocket: 16 MnCrS 5, hardened and straight-toothed Shaft seal: Buramex SF pack Bearing bushings: Bronze AW increased bearing clearance: without Extraction hole: without Temperature monitoring on the stuffing box: BTW062, 1 cold conductor (NAT 100) wired to terminal box IBExU 14 ATEX 1291 X Release device for cold conductors: on site Conveying medium: solvent-based paints + paints, Pigment-containing, max. 100 μm particle size Viscosity: 50 - 5000 mPas Temperature: max 70°C Rinsing with solvent (viscosity 30-1000 mPas) approx. 10% of Timeline Conveying data Q: 65 - 1,130 l/h (5 - 87 Hz) 700 l/h = 50 Hz p: max. 3 bar n: 20 - 335 rpm Direction of rotation: right (with direction arrow) Test run: yes, with HLPD 46 Pre-cleaning: rinse with white spirit Attention: Silicone-free pump! The pump became tested with mineral oil and must be rinsed on site before commissioning! Information sign: EAY924-----PL02 Base plate: EGP913060-24BB05 Base plate with vibration dampers for free installation on Hall floor, article. -No.: ILW040x30-55 and with 4x diameter 14mm mounting holes Coupling: BKUP096-1825-001 Clutch protection: BKS918100110AC03 (brass sheet tread-resistant) Documents for transmissions: EUL---015160BB01 Pump pad: EUL---005110BB02 with helical gearbox with mounting flange for ICE standard motor + Coupling, foot version Manufacturer: Getriebebau Nord (with ATEX certificate) Type: SK 372.1 - IEC 90 Item no.: IUL-SK372-18 Output speed: 195 rpm, i= 7.23 (5 - 87 Hz) Motor size: IEC 90 Design: B3 Output shaft: 25x50 mm Installation position: M1 normal (horizontal) with three-phase standard motor Product no.: LDX090-04-050 Manufacturer: HEW (with ATEX certificate) Power P: 1.1 kW Speed n: 1500 rpm Voltage U: stamped with motor nameplate according to IEC38, (wide voltage range): 220-240 volt triangle 380-415 volt star at 50 Hz 220-240 volt triangle 380-415 volt star at 60 Hz 250-280 volt triangle 440-480 volt star at 60 Hz Voltage tolerance +/- 5% in each case Frequency f: 50/60 Hz Protection class: IP 55 Insulation class: F with 3 PTC conductors for FU operation Efficiency class: IE3 Ignition protection class: II 2G Ex db eb IIC T4 Gb Design: B 5 Coating: RAL 7037 (HCN smooth paint) ATEX - Identification plate: ETY924-D-E--PE03 ATEX stamp: II 2G Ex h IIB T3 Gb X Please comply with the provisions of Directive 2014/34/EU (ATEX) regarding the use of our pumps in potentially explosive areas. Prerequisite for operation: Ex - zone 1 (gas), temperature class T3, Ambient temperature - 20 to 40 °C Limit temperature 100°C Pump unit suitable for on-site FU operation 5-87 Hz |
Press on flag images to see contact information!
