| BRAND | Digitrace LTD |
| Product | RAYSTAT V5 |
| Description | programmable thermostat |
| Internal code | ONR4589045 |
| Custom code | 903289009 |
| Technical specification | programmable thermostat incl. 2-wire NTC probe - silicone-free - (5 m connection cable), device assembly in the non-hazardous area. —> successor device (function switchable) of RAYSTAT-CONTROL-10 and RAYSTAT-ECO-10 —> Please note: The fault message contact is currently NOT loadable with 230 VAC! Operating voltage 230 V AC +10%/-15% =195.5... 253 V AC 50/60 Hz, 3.5 W max. Terminals L-N-PE: 3 pieces max. 6 mm² Output: 3 pieces max. 6 mm² Alarm: 3 pieces max. 1.5 mm² Sensors: 2 pieces max. 1.5 mm² Switching relay 25 A @ 230 V, 1-pole NO Alarm relay 1-pole changeover contact, potential-free (resistive load only) 1.0 A @ 30 VDC (60 VDC max) 0.5 A @ max. 125 VAC Alarm messages, collective fault alarm for - Sensor short circuit/sensor break - undertemperature/over temperature - Input voltage too low - Broken heating tape circuit - sensor connections 1 control sensor NTC 2 kOhm @+25°C 2-wire (can be shielded up to max. 150m with 2x 1.5mm², without charge, be extended) Setting ranges regulator 0... +90°C Pipe contact sensor NTC 0... +30°C ambient sensor/ PASC NTC 0... +250°C pipe contact sensor Pt100 (*) below temperature -40... +65°C/+245°C or OFF Overtemperature +2... +90°C/250°C or OFF Setting ranges depend on the probe used All parameters are stored in non-volatile memory |
Press on flag images to see contact information!
