CONTROL DIGITAL
D-SUB sleeve housing, protection class: IP20, material: ABS, metallized, cable exit: angled, housing size: 1, colour: metallic blank
sleeve housing D7, for vertical bracket, material: PA, cable outlets: 1, straight, 1x M20, height: 77.6 mm, cable gland: with, standard
Contact insert, number of poles: 4+PE, size: D7, number of connections per pole: 1, pin, push-in connection, 230 V/400 V, 10 A, 0.14 mm²... 1.5 mm²
Contact insert module, number of poles: 3, power contacts: 3, control contacts: 0, pin, crimp connection, 500 V, 40 A, 1.5 mm²... 6 mm², application: power
Contact insert module, number of poles: 5, power contacts: 5, control contacts: 0, pin, push-in connector, 400 V, 16 A, 0.14 mm²... 2.5 mm², application: power
HeavyCon blind module, for remaining slots in the module carrier frame
mounting housing D7, with longitudinal bracket, material: PA, height: 25.5 mm, cable screw connection: none, standard
Contact insert, number of poles: 4+PE, size: D7, number of connections per pole: 1, socket, push-in connection, 230 V, 10 A, 0.14 mm²... 1.5 mm²
Protective cover D7, for vertical bracket, material: PA, protective cover material: PA, height: 30 mm, seal: yes, standard, lanyard diameter: 4 mm, with safety line, for socket inserts
mounting housing D7, with longitudinal bracket, material: PA, protective cover material: PA, height: 25.5 mm, cable gland: none, protective cover: yes, standard, for socket inserts
Contact insert module, number of poles: 9, design: D-SUB 9, pin, crimp connection, 48 V, 1 A, 0.08 mm²... 0.5 mm², application: data, without crimp contacts
Contact insert module, number of poles: 4, power contacts: 4, control contacts: 0, pin, crimp connection, 690 V, 40 A, 1.5 mm²... 6 mm², application: power
Contact insert module, number of poles: 3, power contacts: 3, control contacts: 0, jack, crimp connection, 500 V, 40 A, 1.5 mm²... 6 mm², application: power
Contact insert module, number of poles: 5, power contacts: 5, control contacts: 0, socket, push-in connector, 400 V, 16 A, 0.14 mm²... 2.5 mm², application: power
Contact insert module, number of poles: 9, design: D-SUB 9, jack, crimp connection, 48 V, 1 A, 0.08 mm²... 0.5 mm², application: data, without crimp contacts
D-SUB sleeve housing, protection class: IP20, material: die-cast zinc, cable outlet: straight, housing size: 1, colour: metallic blank
protective cover B16, for crossbar, protective cover material: PC, height: 26.4 mm, seal: no, lanyard diameter: 40 mm
Protective cover B6, for vertical bracket, protective cover material: PC, height: 26.3 mm, seal: no, catch hole diameter: 40 mm
signal separator
Power suppression filter
Sensor-actuator patch cord
Sensor-actuator patch cord
Sensor/actuator connectors
Replacement electronics module
