| BRAND | Warex |
| Product | 5113, Type DN100, AT100SR |
| Description | valve |
| Internal code | ONR4045828 |
| Technical specification | DN 100 face to face: 39 mm AT100SR fitted with pneum. actuator, type AT 100.SC-5,5, single acting/spring close air supply necessary: 5,0 bar with mounted with 3/2-solenoid-valve make Herion, type 9710515.2052 monostabil, inc. manual override with cable connection, Make Stahl, type 8163/2-20S-CWe-M20 cat. II 2 G/D, EEx ia IIC T5/T6 namur fitted with 2 slotted proximity sensors, make. P+F, type. SSJ 3,5-N nominal voltage: 8V, opener protection II 1D/2G EEx ia IIC T6 - IP67, (Initiator) mounte in ALU- housing and wired on terminal block acc. 51_0410_9401_02 for indicate " open - close " E-connection: 2 x M 20 with cable screw of brass make Stahl, type CMP-20S/16-CWe - for medium : bulk / air chemical not aggressive, not sticky working pressure : 3,0 bar max. allowable working pressure : 3,5 bar (Ps) MAWP (Note: MAWP = design pressure) max. allowable working temperature: 0° C to +90° C (Ts) MAWT ambient temp.: 0° C to +50° C (Ta) Ex-protection : inside not required / outside according to MSR Technic cat. II 3 G Rating of butterfly-valves according PED/2014/68/EU, diagram 7 Certified module A2 The butterfly-valves are not subject to this conformity assessment Warex-butterfly valve, type: DKZ 110 for mounting between flanges, drilled in ANSI 150 lbs body of silumin with grounded connection sealing element of NBR white replaceable disc of stainless steel 1.4408 for DN 50...350, otherwise 1.4301 shaft of stainless steel 1.4542 or equivalent shaft sealing with O-rings bearing bush of brass test pressure: design pressure x 1,1 bar for tightness |
Press on flag images to see contact information!
