| BRAND | GIMAX |
| Product | BLMBN1812400 |
| Internal code | ONR4941978 |
| Technical specification | BLMN GLASS LED Lamp 3060Lm 18W 24VACDC L=660mm, 70mm, PM20 cable insert OUTER SHELL PY BOROSILICATE GLASS tube with high chemical and mechanical resistance. Temperature maximum working time for short period 500°C. Thermal shock DIN 52323 at 250°C. Thermal expansion (20÷300°C) 3.25 x 10 x K according to DIN 52328. Hydrolytic resistance according to ISO R719: class 1. DIN 12116 acid resistance: class 1. Alkali resistance DIN 52322: class 2. Ovalization according to DIN 7184. Tube thickness 5mm outer diameter 70mm (± 1.5mm). SIDE CLOSURES Side closures in TAROPLAST material (Taromid A 280 MT6) 6.6 loaded at 50% (PA6.6+ 50% F.V.) reinforced with fiberglass (Glow wire test 960°) Each closure is made of two parts Separates that, when the locking screws are tightened, compress the gaskets against the methacrylate tube, thus obtaining effective protection against water infiltration and powder. GASKETS BAYER silicone-based O-RING sealing gaskets in red color. Particularly suitable for used in environments with a high temperature range (from -60°C to 180°C), this seal, thanks to the its stability over time, guarantees a reliable seal. INTERNAL SUPPORT Reflective aluminum screen for maximum light output, with support function for drivers and LED modules. LED LIGHTING MODULES The modules are essentially made up of multiple LED-type emitters with shapes, dimensions and provisions to optimize luminous uniformity in relation to heat dissipation. the type of coloring adopted, instead of fluorescent lamps with white or very white light normally used, it has a color temperature included in the range 4300÷4500 °K (light very white). Life of 50,000 hours (at 25°C) against 8-10,000 hours of fluorescent tubes or 500-2000 hours of halogen lamps. Completely insensitive to frequent ignition (a factor that significantly limits the duration of fluorescent tubes) Instant ignition (without warm-up times) at any operating temperature (from -30°C to +40°C) with no starting currents (oversizing is avoided power lines or any power transformers) Light output of more than 50% of fluorescent tubes because the light emission has an angle of 120° against that of the fluorescent system which is 360°, therefore, all the luminosity is used for illuminate the affected area without dispersion of light into the external environment. This leads to a significant savings in terms of energy consumption while maintaining the same degree of illumination of the affected areas. GENERAL CHARACTERISTICS Insulation class...: II (230V) III (24V). Degree of protection...: IP67 (IEC 529 and CEI 70-1 standards). Marking...: CE The lamp is equipped with: - n. 1 PM20 cable entry, degree of protection IP68, complete with device tear-proof, placed laterally to a closure. - n. 1 electronic control board: Selected components with high quality standards. Stabilized output stage, in PWM technology, to ensure constant luminous flux even in presence of temporary changes in supply voltages. Complies with EN 60928, EN 61547, EN 61000-3-2, EN 61000-3-3 61000-4-2, 61000-4- 3, 61000-4-4, 61000-4-5, 61000-4-6, 61000-4-11, EN 55015, EN60598-1, EN60598-2-1, EN61374- 1, EN61347-2-3, EN60249-1. - n. 1 LED module consisting of n. 60 LEDs, total power 18W (high efficiency 3060 lumens), Cold white color, color temperature 6500°K, 50,000 operating hours). Operating temperature...: from -10°C to +50°C Power supply...: 24V AC-DC Lamp length...: 660 mm. C.a |
Press on flag images to see contact information!
