| BRAND | GIMAX |
| Product | BLGPN4032400 |
| Internal code | ONR4905161 |
| Technical specification | BLGP Polic.6690lm 40W 24VACDC LED lamp L=1445mm, 50mm, PM16 cable input Lamp composed as follows: OUTER SHELL METHACRYLATE tube with incomparable characteristics of transparency and brilliance. Excellent resistance to any climate, to weather agents and to aging; does not turn yellow, does not corrodes, does not deteriorate; high stiffness and dimensional stability. Excellent chemical resistance to most commonly used substances such as alkalis and weak acids, inks, cosmetics and aliphatic hydrocarbons (oils and fats). Maximum continuous operating temperature 85-90°C. Thickness of 5mm tube outer diameter 70mm. normally used, it has a color temperature included in the range 4300÷4500 °K (light very white). Life of 50,000 hours (at 25°C) against 8-10,000 hours of fluorescent tubes or 500-2000 hours of halogen lamps. Completely insensitive to frequent ignition (a factor that significantly limits the duration of fluorescent tubes) Instant ignition (without warm-up times) at any operating temperature (from -30°C to +40°C) with no starting currents (oversizing is avoided power lines or any power transformers) Light output of more than 50% of fluorescent tubes because the light emission has an angle of 120° against that of the fluorescent system which is 360°, therefore, all the luminosity is used for illuminate the affected area without dispersion of light into the external environment. This leads to a significant savings in terms of energy consumption while maintaining the same degree of illumination of the affected areas. GENERAL CHARACTERISTICS Insulation class...: II (230V) III (24V). Degree of protection...: IP67 (IEC 529 and CEI 70-1 standards). Marking...: CE SIDE CLOSURES Side closures in TAROPLAST material (Taromid A 280 MT6) 6.6 loaded at 50% (PA6.6+ 50% F.V.) reinforced with fiberglass (Glow wire test 960°) Each closure is made of two parts Separates that, when the locking screws are tightened, compress the gaskets against the methacrylate tube, thus obtaining effective protection against water infiltration and powder. GASKETS BAYER silicone-based O-RING sealing gaskets in red color. Particularly suitable for used in environments with a high temperature range (from -60°C to 180°C), this seal, thanks to its stability over time, guarantees a reliable seal. INTERNAL SUPPORT Reflective aluminum screen for maximum light output, with support function for the converter (where provided) and LED modules. LED LIGHTING MODULES The modules are essentially made up of multiple LED-type emitters with shapes, dimensions and provisions to optimize luminous uniformity in relation to heat dissipation. the type of coloring adopted, instead of fluorescent lamps with white or very white light The lamp is equipped with: - n. 1 PM16 cable grommet degree of protection IP68, complete with anti-tear device, placed laterally to a closure. - n. 1 electronic control board: Selected components with high quality standards entirely designed and built with GIMAX technology Stabilized output stage, in PWM technology, to ensure constant luminous flux even in presence of temporary changes in supply voltages. Complies with EN 60928, EN 61547, EN 61000-3-2, EN 61000-3-3 61000-4-2, 61000-4- 3, 61000-4-4, 61000-4-5, 61000-4-6, 61000-4-11, EN 55015, EN60598-1, EN60598-2-1, EN61374- 1, EN61347-2-3, EN60249-1. - n. 1 LED module consisting of 180 LEDs, total power 40W (high efficiency 6690 lumens), Cold white color, color temperature 6500°K, 50,000 operating hours). Operating temperature...: from -10°C to +50°C Power supply...: 24V AC-DC Lamp length...: 145 mm. C.a. |
Press on flag images to see contact information!
