| BRAND | Infastaub |
| Product | AJV 300-980-1 S |
| Description | nitrogen supply system |
| Internal code | ONR4835819 |
| Custom code | 84 21 39 25 |
| Technical specification | specifications Ventilator type V30 Temperature (ambient) +0 to 40 °C Temperature (product/gas) 20° Celsius Case strength low pressure -50 mbar Case strength overpressure 50 mbar Ex-zone within the filter (on the raw gas side) 21 Ex-zone within the filter (on the clean gas side) 22 22 Ex zone outside the filter system Max. flow rate 1.5 Bm³/min Type of dust Metal dust: dry, free-flowing, flammable Particle fraction fine content 5-20 µm Specific filter area load max. 1.5 m³/m²*min Dust load <40 g/m³ Residual dust content <5 mg/m³ 80-100 daPA filter resistance Standard compressed air consumption 7 m³/h with a break time of 10 s Required cleaning pressure 6 bar Minimum ignition energy > 10 mJ Ignition temperature > 300 °C Glow temperature > 275 °C Control unit input voltage 230 V, 50 Hz 24 V DC solenoid valve voltage Motor voltage 230 V, 50 Hz Installation in the room Filter area 1 m² surface protection stainless steel parts pickled and passivated, Normal steel parts degreased and phosphated 2K polyurethane single-coat paint Total layer thickness 60-80 µm Corrosivity category C2 in accordance with DIN EN ISO 12944-2 Small parts galvanised Colour RAL 7035, light grey Material: 1.4301 in the following version: - without InfaStaub advertising stickers - - with InfaStaub type plate - - Product parts in contact with the product in material 1.4301 (hose base, filter coating and lower part with dust pot) - Support cages in 1.4301 - Clean gas chamber with fittings and attachments as well as clean gas lid and compressed air tank in S235JR material - with ventilator mounted on the filter ceiling - with standard clean gas socket and blind cover |
Press on flag images to see contact information!
