| BRAND | Schmidt |
| Product | 327-3K.50-C700TH-PP2 |
| Internal code | ONR4966309 |
| Technical specification | (1) Nr 327-3K.50 Direct Acting Press, including: - 20 kN / 4,495 lbs of operating force @ 6 bar / 87 psi - 50 mm / 1.968" of fully adjustable ram stroke - Fully adjustable working height from 140 mm to 350 mm / 5.51" - 13.78 - Weld construction steel frame - Throat depth 131 mm 5.16" - Permanently lubricated air cylinder - Piston with built in magnet for external ram position sensing - Precision rectangular ram guided via (3) Teflon lined gib - 20 mm diameter ram bore - Precision ground tooling plate with centering bore and T-slot - Integrated 30kN / 6,745 lb. load cell - Integrated Linear Scale - Integrated signal amplifier - Integrated PDA (1) SCHMIDT PressControl 700, including: - Industrial PC using a Linux based operating system. - 256.54mm / 10.1” full HD monitor (1280x800) with capacitive multi-touchscreen, pinch to zoom, drag and drop and screen splitter capabilities. - Interface: (2) USB 2.0, (2) USB 3.0, (2) Ethernet, M12 and (1) EtherCAT-P, M8 ports - Protection class: IP 54 - 24VDC system power - Batch counter and Cycle counter - 3M Cable length from control to press - SCHMIDT Technology Standard Dataset driven programming - Password protected access levels - Vesa 75 mounting surface - SCHMIDT Technology standard table mounting plate25 April 2024 Page 2 of 5 - Dimensions: 260mm / 10.24” wide x 179mm / 7.05” tall x 82mm / 3.23” deep - Weight: 1.9kg / 4.2 lbs. (1) SCHMIDT SafetyModule – TH version, including: - Full redundant two-hand based safety control system, Rated PLe - Main power supply, with lock-out/tag-out, power distribution & wire termination - Power indicator - (1) Pair of spring-loaded Push-Button Type Two Hand cycle start buttons wired for two-hand anti-tie down/anti-repeat functionality - Enclosure, mounted to left side of press, painted RAL 7035 (1) Completely Press Pneumatic Package PP2, including - Electronic dump valve - Air supply pressure monitor - Two monitored 2-positon solenoid valves, - Pressure regulator with gauge and filter/bowl - Provisions for expansion of up to (4) 5/2, 1/8” valves (sold separately) - Pneumatic package installed on sub-plate, complete, and mounted to press with column. In case of modular head, pneumatic package is shipped un-mounted. (1) Remote Mount E-stop and Lighted Fault/Reset Button, including: - E-stop button wired to dual channel safety circuit of system. - Blue lighted reset button, wired to reset input of safety module and programmed for SCHMIDT standard fault reset. - Both buttons integrated into a single remote mountable aluminum enclosure with approx. 1.5M (5’) of cable to the safety module. Return stroke initiation can be based on: - Reaching nominal selected press force in .01kN resolution - Reaching programmed stroke limit in .005 mm resolution - Reaching programmed press dwell time Technical data SCHMIDT® PressControl 700: Measuring method: Force via load cell integrated into ram Stroke via inductive magnetic scale Force resolution: Load Cell Newton Pounds 30kN 6.25 1.405 Stroke resolution: 0.005 mm / 0.0002" Monitoring parameters: (12) user definable windows or stroke tolerances, each defined by force and distance Graphic display: Absolute values Display options: Force vs. Stroke, Force vs. Time or Stroke vs. Time Data transfer: USB Memory Device or Ethernet to SCHMIDT optional software (DataBase or FileXchange) Digital Inputs/Outputs 0/0 - Optional Item MovTol-700 Software: This optional software enables synchronous shifting of selected ram stroke as well as force/distance tolerance parameters (windows). Such conditions are common in either die cast or plastic injection molded parts which are produced from multi-cavity molds or dies and are therefore subject to varying machine tolerances.25 April 2024 Page 3 of 5 Utilities - 100 – 240 VAC, 50 / 60 Hz supply voltage, < 2 Amp - 24 VDC control voltage, < 3 Amp, provided by internal power supply - Filtered, compressed, oil free air, pressure: 6 – 8 bar / 80 – 130 psi (1) Nr 327-3K.50-C700TH-PP2 Monitored Direct Acting Air Press Complete Press with integrated Force and Displacement sensors, PressControl 700 Press Force & Displacement Monitoring System and Schmidt SafetyModule programmed for single station with two-hand cycle start, ready for tooling |
Press on flag images to see contact information!
