| BRAND | Labom |
| Product | MZ1100-B901-W1201 CV3110-A1059-F80-H2100-M1-N10-T30-K1085 BH4210-A91 DL3230-HY06-A4007-L23-T64-W1020-W1223 |
| Internal code | ONR4440805 |
| Custom code | 90262020 |
| Technical specification | * MZ1100-B901-W1201 CV3110-A1059-F80-H2100-M1-N10-T30-K1085 BH4210-A91 DL3230-HY06-A4007-L23-T64-W1020-W1223 # Spare part for fab.-no. 1812054/30/001 MZ1100 COMBIBAR PRESSURE MEASURING SYSTEM B901 - drawing no.: see below W1201 - INSPECTION CERTIFICATE DIN EN 10204 3.1 calibration certificate with 5 measuring points CV3110 - PRESSURE TRANSMITTER PASCAL CV, for diaphragm seal operation, hygienic acc. to data sheet D4-017/22 A1 - pressure sensor: piezoresistive for gauge pressure 059 - nominal range: 0...16 bar, overload limit 60 bar measuring range setting: turndown 5:1 accuracy: <= 0.15% of measuring span (linearity, hysteresis and repeatability) F80 - measuring range: setting see below lower range value: - 1,000 upper range value: + 9,000 unit: bar H21 - output signal: 4...20 mA with HART function module 0 - setting damping: 0.0 sec. (standard) 0 - setting alarm state: < 3.6 mA (standard) M1 - display module: without screw cap closed, without window N10 - switching module: without case: hygienic housing design with screw cap material: stainless steel degree of protection: IP 66 T30 - electrical connection: circular connector M12x1 (4 pin) K1085 - design standard process temperature 0...+125 °C, short term up to +140 °C, 1 h BH4 - BOURDON TUBE PRESSURE GAUGE with diaphragm seal connection, chemical design acc. to data sheet D2-029 2 - case: NS 100 10 - case design: IP 65, process connection at back A - accuracy: class 1.0 per EN 837-1 91 - nominal range: -1...9 bar pointer: with micro adjustment DL - DIAPHRAGM SEAL for food / pharmaceutical / biotechnology 3 - design with clamp connection see data sheet D5-026 230 - process connection: per DIN 32676 model C (Tri-Clamp) for pipes per ASME BPE, DN 1 1/2" / PN 25 HY06 - hygienic design per EHEDG Doc.8 and ASME BPE SF1: surface roughness (wetted parts) - turned parts Ra <= 0.51 μm - diaphragm Ra <= 0.38 μm - weld seam Ra <= 0.76 μm A400 - connection of meas. instrument directly welded 7 - material wetted parts: stainless steel mat.-no. 1.4435 (316L) L23 - system filling: Synthetic oil, free of silicon FD1 acc. to FDA 21 CFR 178.3570 / H1-registered T64 - temperature, media: 0...+140 °C W1020 - Components marked acc. to material inspection certificate per EN 10204-3.1, wetted parts W1223 - INSPECTION CERTIFICATE DIN EN 10204 3.1 roughness height rating Ra |
Press on flag images to see contact information!
