| BRAND | Haupa |
| Product | 110592 |
| Internal code | ONR4465131 |
| Custom code | 82041200 |
| Technical specification | Haupa Adjustable wrench (No: 110592), maximum length 200 mm, or equivalent product with the following features: - Length: Minimum 180 mm and maximum 220 mm - The minimum width of its mouth is at least 8 mm and at most 10 mm, its maximum width is at least 23 mm and at most 25 mm, - key hardness must be at least 40 HRC - for key head; 32 HRC - for handle; - parameters of the roughness of the surfaces of Ra keys - no more than: 1.6 micron - support surfaces of the jaws and the outer contour; 6.3 micron - working surfaces of the throats; 12.5 micron - other surfaces. - torque of not less than 180 Nm; - The working surfaces of the key jaws must be parallel to each other; - enlargement towards the floor of the mouth not exceeding 2°, deviation from parallelism is allowed; - the angle of inclination of the head is at least 20° and not more than 24°; - the handle must be covered with a layer of polyvinyl chloride or rubber; - Weight min 300 and max 400 g. |
Press on flag images to see contact information!
