| BRAND | Labom |
| Product | CV3110-A1059-F80-H1100-M2-N51-T31-K1085-W4020-W2002 DL3230-HY06-A4007.9-L22-W1020-W1102 |
| Internal code | ONR4890335 |
| Technical specification | Spare part for Fab.-No.: 0507456/03/001 CV3110 PRESSURE TRANSMITTER PASCAL CV, for diaphragm seal operation, hygienic acc. to data sheet D4-017/22 A1 pressure sensor: piezoresistive for gauge pressure 059 nominal range: 0...16 bar, overload limit 60 bar measuring range setting: turndown 5:1 accuracy: <= 0.15% of measuring span (linearity, hysteresis and repeatability) F80 measuring range: setting see below lower range value: - 1,000 upper range value: +9,000 unit: bar H11 output signal: 4..20 mA, rising characteristic (standard) 0 setting damping: 0.0 sec. (standard) 0 setting alarm state: < 3.6 mA (standard) M2 display module: multifunctional display with 5-position digital display and bar graph, pluggable N5 switching module: with 2 floating channels, pluggable, electrically isolated at all sides, switching capacity 30 V DC /0.5 A 1 switching module setting: at the factory, see below 1. switch contact switch point: 50% switch contact: breaker hysteresis: falling 0,1% 2. switch contact switch point: 50% switch contact: breaker hysteresis: falling 0,1% case: hygienic housing design with screw cap material: stainless steel degree of protection: IP 66 T31 electrical connection: circular connector M 12x1 (8 pin) K1085 design standard W4020 ADDITIONAL DESIGN: marking (adhesive label), see below W2002 CALIBRATION PROTOCOL: with 5 measuring points DL DIAPHRAGM SEAL for food / pharmaceutical / biotechnology 3 design with clamp connection see data sheet D5-026 230 process connection: per DIN 32676 model C (Tri-Clamp) for pipes per ASME BPE, DN 1 1/2"/ PN 25 HY06 hygienic design per EHEDG Doc.8 and ASME BPE SF1 surface roughness (wetted parts) - tumed parts Ra <= 0.51 ym - diaphragm Ra <= 0.38 um - weld seam Ra <= 0.76 ym A400 connection of meas. instrument directly welded 7.9 material wetted parts: stainless steel mat.-no. 1.4435 (316L), delta ferrite content <3 % L22 system filling: Synthetic o, free of silicon FD1 acc. to FDA 21 CFR 178.3570 / Hi-registered design temperature process -10...+140 °C w1020 Components marked acc. to material inspection certificate per EN 10204-3.1, wetted parts w1102 TEST REPORT per DIN EN 10204 2.2 as per customers specification, see below - Confirmation of FDA conformity of the system filling used - The surface roughness of the diaphragm on the above devices: Ra <0.6um |
Press on flag images to see contact information!
